Design contains obsolete parts

TPS40140EVM-002: 1.5V and 3.3V @ 20A, 12V in

Summary

TPS40140EVM-002 is designed to use a regulated 10.8V to 13.2V bus to produce two high-current, regulated outputs. Both outputs are capable of supplying up to 20A of load current.

The TPS40140EVM-002 is design to demonstrate the TPS40140 in a typical regulated bus to low-voltage application while providing a number of test points to evaluate the performance of the TPS40140 in a given application.

Features:

10.8V - 13.2V input range
3.3V and 1.5V fixed output
20A DC steady-state current per output
500kHz switching frequency per phase
Single main switch N-channel MOSFET and two synchronous rectifier N-channel MOSFETs per phase
Convenient test points for probing critical waveforms and non-invasive loop response testing

Specifications

Manufacturer	Texas Instruments
Category	AC/DC and DC/DC Conversion
Sub-Category	DC/DC SMPS - Multi Output
Eval Board Part Number	296-22909-ND
Eval Board Supplier	Texas Instruments
Eval Board	Normally In Stock
Topology	Step Down
Outputs and Type	2 Non-Isolated
Voltage Out: Highest Current First	1.5V, 3.3V
Current Out	20A per Channel
Voltage In	10.8 ~ 13.2 V
Efficiency @ Conditions	>92%, 12V in, 3.3V @ 4 ~ 20 A >88%, 12V in, 1.5V @ 7 ~ 20 A
Voltage Out Range	- Not Given
Features	LDO Regulator(s), On-Chip Over Current Protection Power Good Output Shutdown, Enable, Standby Soft Start Thermal Protection Under Voltage Protection, Brown-Out
Switching Frequency	500 kHz
Standby Current [Typical]	1 µA
Quiescent Current [Typical]
Component Count + Extras	80 + 31
Internal Switch	Yes
Design Author	Texas Instruments
Application / Target Market	Computers Point of Load (PoL) Servers Telecom
Standby Current [Maximum]	10 µA
Quiescent Current [Maximum]
Main I.C. Base Part	TPS40140
Date Created By Author	2006-09
Date Added To Library	2018-11